With over 50,000 monthly Google searches relating to motorcycle maintenance in the UK, it can be overwhelming to know what needs to be done and when to keep your bike in top condition, especially if you are a new rider.

While there is no generic answer as to how often you should be getting your motorcycle serviced, luckily, many of these things can be done at home with recommended timings available in your owner’s manual. Jessica Lofts from Lexham Insurance’s BikeMatters team, shares seven motorcycle maintenance tasks new motorcyclists won’t want to neglect to keep their bike in top condition over the year ahead.

Checking your tyres: This is one of the easiest and most essential maintenance tasks you should be carrying out monthly to keep your motorcycle running smoothly. To check your tyre pressure, “locate the valve stem, typically on the inside of the wheel, and attach an air pressure gauge system” advises Jessica. “Compare it against the recommended pressure on the tyre’s sidewall.” If needed, you can top up at most UK petrol stations if you don’t have a pump at home.

For tyre tread, use a tread gauge or check the wear indicator, a small rubber knob in the grooves. “If it’s level with the rubber that meets the road, it’s time for a replacement from the professionals,” Jessica adds.

Adjusting your motorcycle chain: Easy enough to do from home, your motorcycle chain should also be checked and adjusted as needed on a regular basis to keep you safe and look after your bike. “If your motorcycle chain is too tight, it will put stress on several parts of the bike – especially the sprockets”, explains Jessica. “This can cause the sprockets to wear faster and make the engine work a lot harder than it needs to be resulting in the suspension feeling abrupt or uncomfortable.”

She adds, “if your motorcycle chain is too loose it will move around, and in worst-case scenarios even jump off the sprocket, get tangled, or throw you off the bike.” Adjusting the chain involves checking your owner’s manual to identify the correct slack, adjusting the tension and ensuring proper wheel alignment before tightening back up.

Changing your motorbike oil and filters: Motorcycle oil does tend to evaporate at high heat, so if you’re someone who commutes or uses your bike regularly, you will need to keep a frequent eye on your oil levels. You can check these are between the full and empty markers via your motorcycle’s inspection window or dipstick while the engine is warm and upright. If you are using a dipstick, you will need to fully remove it and wipe clean before reinserting and removing again to check the levels.

“In order to keep your engine running efficiently, you will need to keep on top of changing your motorbike oil regularly, following your manufacturers’ guidance”, Jessica notes. It is also important to regularly replace your air filters. “In general, it is recommended that you replace them every 10,000-15,000 miles depending on the type of air filter you have”, she adds. These can be found in the airbox, usually under the tank or to one side, depending on your model.

Brake maintenance: Failure to take care of your motorcycle brakes can and will result in your brakes having unwanted and preventable damage or uneven wear. “When carrying out maintenance tasks on your brakes, it is important to work slowly and cautiously”, Jessica stresses. There are several different things to keep in check which can be done at home, such as monitoring fluid levels and assessing brake drums and pads for damage. 

“When it comes to brake fluid, most manufacturers will recommend changing it at least once every two years. This is due to the fact brake fluid absorbs moisture, and the more water that it absorbs, the lower the temperature at which it boils, ultimately affecting your braking performance”, adds Jessica.

Replacing your spark plugs: Most spark plugs tend to have a life expectancy of anywhere between 15,000-20,000 miles due to their location on the bike, which gets extremely hot being close to the engine chamber and materials begin to break down quicker. Jessica explains, “There are many indicators that will tell you that you need to change your spark plugs such as your engine misfiring, flooding in your engine, or you may find that your plugs themselves are burnt, broken, or corroded.” Checking and replacing is a fairly simple job requiring a torque wrench, a brush, and a wire spark plug gauge.

Checking if your forks are bent: There are lots of reasons that can cause bending such as having an accident or collision, constant heavy braking or overloading/improper loading. “Very minor bending of your forks will not affect your city riding or commuting, however, your bike will most certainly feel less stable and may have the tendency to vibrate more, especially at higher speeds”, shares Jessica. “If you do think that your motorcycle forks are bent or damaged in any way, take it in to be repaired by a professional as this is an extremely tricky and precise task that you would struggle to carry out at home.”

Keep your battery charged: While riding your motorcycle regularly can help keep your battery charged, you should also be attempting to keep it charged outside of riding. Some suggest once per week when not in use, although you could fit a trickle charger to make things easier. Jessica says, “Motorbike batteries can be jump-started much like car batteries, however, it is always advisable to take care of them and keep them charged so this shouldn’t have to be done.”

It is important to be knowledgeable and competent in maintenance tasks before carrying them out. It also goes without saying that not all bikes are the same across the board and it is recommended to refer to your owner’s manual and educate yourself on things such as the location of filters and plugs, the correct fluids and their amounts, and torque specifications for reinstalling nuts and bolts before conducting any maintenance.

More information including step-by-step instructions for each of these maintenance tasks can be found in Lexham’s DIY Motorcycle Maintenance Guide: www.lexhaminsurance.co.uk/blog/diy-motorcycle-maintenance-guide/